VIA메인보드질문요..
 정석원
 조회 : 1395 , 2004/01/11 16:39
산드라로 본 결과..
SiSoftware Sandra

Mainboard
Manufacturer : U COMPANY
MP Support : No
Model : U8648

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 768MB
Bank0/1 - A0 : DIMM 256MB
Bank2/3 - A1 : Empty
Bank4/5 - A2 : Empty

Chipset 1
Model : VIA Technologies Inc VT8753 Apollo P4X266 System Controller
Bus(es) : AGP PCI USB i2c/SMBus
Front Side Bus Speed : 4x 100MHz (400MHz data rate)
Maximum FSB Speed / Max Memory Speed : 4x 100MHz / 1x 133MHz
Width : 64-bit
IO Queue Depth : 8 request(s)

Chipset 1 Hub Interface
Type : V-Link
Width : 8-bit
Full Duplex : Yes
Multiplier : 1/1x
Speed : 4x 66MHz (264MHz data rate)
IO Queue Depth : 9 request(s)

Logical/Chipset 1 Memory Banks
Bank 0 : 128MB SDRAM 3-3-3-7CL
Bank 1 : 128MB SDRAM 3-3-3-7CL
Bank Interleave : 4-way
Speed : 1x 133MHz (133MHz data rate)
Multiplier : 4/3x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 1 : Hyundai Electronics 71V32635AT8-H 39F0C10E 256MB 16x(16Mx8) SDRAM PC133U-333-542 (CL3 up to 133MHz) (CL2 up to 100MHz)

Environment Monitor 1
Model : Winbond W83697HF ISA
Version : 6.00
Mainboard Specific Support : No

Temperature Sensor(s)
CPU Temperature : 41.5°C / 106.7°F td

Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 3013rpm

Voltage Sensor(s)
CPU Voltage : 1.70V
+3.3V Voltage : 3.33V
+5V Voltage : 5.03V
+12V Voltage : 11.73V
-12V Voltage : -12.28V
-5V Voltage : -5.10V
Standby Voltage : 5.04V
Battery Voltage : 3.23V

AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x 66MHz (264MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : No
Side Band Enabled : No
Side Band Support : Yes
Aperture Size : 64MB

PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (33MHz)
Multiplier : 1/3x

LPC Hub Controller 1
Model : VIA Technologies Inc VT8233 PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Random Number Generator Enabled : No
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz

USB Controller 1
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 3
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : VIA VT823x SMBus
Slave Device Enabled : No
Speed : 16kHz

Expansion Slot(s)
PCI (8h) : PCI 32-bit +5V Full-Length Available
PCI (9h) : PCI 32-bit +5V Full-Length Available
PCI (Ah) : PCI 32-bit +5V Full-Length Used (Supernet Inc RoadRunner 10 ADSL PCI)
PCI (Bh) : PCI 32-bit +5V Full-Length Available
PCI (8h) : PCI 32-bit +5V Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Used (Sigmacom Co Ltd GeForce2 MX/MX 400 [NV11])

Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - None / PS/2
PS/2 Mouse - Detected : Mouse - PS/2 / PS/2
USB : USB - None / None

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

이 메인보드에 지포스FX5200 이랑 512DDR 램을 사용할려고하는데.. 가능한가요?
xxx
불법 광고글 신고하기
   이 게시물의 댓글 보기
  빅파이 (ID) / 04-01-11 22:50/ 이댓글에댓글달기
  유니텍 보드군요 제가 보기엔 SD램 인거 같습니다
유니텍 회사 참고 하시구요 fx5200장착 가능합니다
  빅파이 (ID) / 04-01-11 22:52/ 이댓글에댓글달기
  sd램전용이군요 -- ddr은 불가능합니다
  extreme243 (ID) / 04-01-12 11:20/ 이댓글에댓글달기
  유니텍홈페이지에서 P4XD-MAX(소켓423),P4V-TANK(소켓478),P4V-TANK DDR(소켓478)봤는데 이 셋중에 어디에 해당하나요...
로그인 | 이 페이지의 PC버전
Copyright NexGen Research Corp. 2010