다시 한번 질문 올립니다..
임재영
조회 :
3059 ,
2005/02/22 23:03 |
|
|
|
저번에 메인보드에 대한 질문을 올렸는데..
제가 아는정보로는 자세한 설명을 못드리는 것 같아서..
이렇게 다시 올립니다.
제 메인보드 정보는..
System
Manufacturer : VIA Technologies, Inc.
Model : P4X266-8233
ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF
Mainboard
Manufacturer : Jetway
MP Support : No
Model : P4X266-8233
System BIOS : 03/11/2002-P4X266-8233-6A6LWJ19C-00
Chipset : VIA P4X266/A
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 768MB
Bank0/1 - A0 : None None None None DIMM 256MB
Bank2/3 - A1 : None None None None DIMM 256MB
Bank4/5 - A2 : Empty
Chipset 1
Model : VIA Technologies Inc VT8753 Apollo P4X266 System Controller
Bus(es) : ISA AGP PCI USB i2c/SMBus
Front Side Bus Speed : 4x 101MHz (404MHz data rate)
Maximum FSB Speed / Max Memory Speed : 4x 100MHz / 2x 133MHz
Width : 64-bit
IO Queue Depth : 8 request(s)
Chipset 1 Hub Interface
Type : V-Link
Width : 8-bit
Full Duplex : Yes
Multiplier : 1/1x
Speed : 4x 66MHz (264MHz data rate)
IO Queue Depth : 9 request(s)
Logical/Chipset 1 Memory Banks
Bank 0 : 128MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank 1 : 128MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank 2 : 128MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank 3 : 128MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank Interleave : 4-way
Speed : 2x 134MHz (268MHz data rate)
Multiplier : 4/3x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No
Memory Module(s)
Memory Module 1 : Samsung M3 68L3313DTL-CB0 21037305 256MB 16x(16Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5 up to 133MHz) (CL2 up to 100MHz)
Memory Module 2 : Samsung M3 68L3313DTL-CB0 212D7305 256MB 16x(16Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5 up to 133MHz) (CL2 up to 100MHz)
Environment Monitor 1
Model : Winbond W83697(T)HF ISA
Version : 6.00
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 37.0°C / 98.6°F
CPU Temperature : 64.0°C / 147.2°F td
Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 4561rpm
Voltage Sensor(s)
CPU Voltage : 1.42V
+3.3V Voltage : 3.25V
+5V Voltage : 5.05V
+12V Voltage : 11.67V
-12V Voltage : -12.03V
-5V Voltage : -5.15V
Standby Voltage : 4.85V
Battery Voltage : 3.20V
AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x 66MHz (264MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : No
Side Band Enabled : Yes
Aperture Size : 64MB
PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (33MHz)
Multiplier : 1/3x
LPC Hub Controller 1
Model : VIA Technologies Inc VT8233A PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz
USB Controller 1
Model : VIA Technologies Inc VT8233A USB Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : VIA Technologies Inc VT8233A USB Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 16kHz
Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (VIA Technologies Inc VT8633 Apollo Pro 266 CPU to AGP Controller)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Available
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Available
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Used
AGP (8h) : AGP 32-bit +5V Full-Length Available (ATI Technologies Radeon 9600 XT (V350))
Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB : USB - None / None
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
이렇게 됩니다... 아는게 없어서 그냥 그대로 복사해서
올리게 됬습니다..
제 메인보드로.. 하드 몇 기가정도 달수있을까요?
아니 그냥 업그레이드의 한계를 알고싶습니다..
아니면 그냥 메인보드를 하나 구입할껀지..
좋은 조언 부탁드립니다. |
|
|
|
