INTEL에서 출시 예정인 FSB800Mhz를 지원하는 칩셋인 Canterwood칩셋을 채용한 제품이 한 제조사 사이트에 등록되었다고
한다.
이 소식에 따르면 이번에 알려진 제품은 해당 제조사에 정식으로 등록된것은 아니며 아직 공개되지는 않은 제품의 스펙이라고 한다.
이제품은 현재 DFI의 PS88-EA라고 하며 이미지는 없으나 제품의 상세한 스펙이 등록되어있다고 하는데 스펙을 보면 ICH5를 장착하여
2채널의 SerialATA 커넥터를 제공하며 FSB800Mhz의 지원과 최대 DDR400메모리의 듀얼 채널 구성 등 상당한 스펙으로 무장되어
있는것을 볼수있다. 아참.. DDR400에서는 그동안 알려진 Turbo Mode도 제공하고 있는것으로 보여진다.
| PS88-EA |
|
| PROCESSOR |
Intel P4 Northwood and Prescott processor (478-pin)
Supports 800MHz, 533MHz or 400MHz FSB |
| PROCESSOR SOCKET |
Socket 478 |
| CHIPSET |
Intel Canterwood chipset
- Intel 82875P Memory Controller Hub (MCH)
- Intel 82801EB I/O Controller Hub (ICH5) |
| SYSTEM MEMORY |
Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
Supports up to 4GB system memory
Synchronous operation with processor system bus
- PC3200 (DDR400) with 800MHz FSB CPU (supports Turbo mode)
- PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
- PC2100 (DDR266) with 400MHz FSB CPU
Supports ECC/non-ECC DIMM
Supports unbuffered DIMMs |
| BIOS |
Award BIOS
Windows 98SE/2000/ME/XP Plug and Play compatible |
| POWER MANAGEMENT |
Supports ACPI specification and OS Directed Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
- Wake-On-Keyboard/Mouse
- Wake-On-USB Keyboard
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system
AC power failure recovery |
| HARDWARE MONITOR |
Monitors CPU/system temperature and overheat alarm
Monitors Vcore/5VSB/VBAT/3.3V/5V/12V voltages and failure alarm
Monitors CPU/chassis/second fan speed and failure alarm
Automatic CPU/chassis/second fan on/off control
Read back capability that displays temperature, voltage and fan speed |
| ONBOARD AUDIO FEATURES |
20-bit stereo full-duplex codec with independent variable sampling rate
High quality differential CD input
True stereo line level outputs
S/PDIF-in/out interface
6-channel audio output |
| ONBOARD LAN FEATURES |
Uses 82562EX 10/100 LAN interface
Integrated IEEE 802.3, 10BASE-T and 100BASE-TX compatible PHY |
| PCI IDE INTERFACE |
Supports ATA/33, ATA/66 and ATA/100 hard drives |
| SATA IDE INTERFACE |
Supports two SATA (Serial ATA) interfaces which is compliant with SATA 1.0 specification |
| ACCELERATED GRAPHICS PORT |
Supports 1.5V AGP card (3.3V AGP card not supported)
Supports AGP 3.0 and AGP 2.0 spec.
AGP 8x data rate provides a theoretical maximum bandwidth of 2.13GB/sec |
| REAR PANEL I/O PORTS |
4 USB 2.0/1.1 ports
1 RJ45 LAN port
2 DB-9 serial ports
1 DB-25 parallel port
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
3 audio jacks: line-out, line-in and mic-in |
| I/O CONNECTORS |
2 connectors for 4 additional external USB 2.0/1.1 ports
1 connector for external line-out and mic-in jacks
1 connector for an external game/MIDI port
2 internal audio connectors (CD-in and AUX-in)
1 4-channel audio output connector
1 S/PDIF-in/out connector
1 connector for IrDA interface
2 Serial ATA connectors
2 IDE connectors
1 floppy connector
2 ATX power supply connectors
1 Wake-On-LAN connector
CPU fan, chassis fan and second fan connectors |
| EXPANSION SLOTS |
1 AGP slot that supports 1.5V AGP
5 PCI slots |
| COMPATIBILITY |
PCI 2.2 and AC97 compliant
Intel AGP version 3.0 |
| PCB |
4 layers, ATX form factor
30.5cm (12.05") x 24.4cm (9.6") |
